Green Box srl - Italy



Temperature Controllers “MV-DC” Range

Many plastic processes require water at temperature slightly higher than the water temperaturewhich is available in the central cooling system.
Very frequently in the same applications a large amount of heat must be removed from the process ( mould or roll) and for this reason the temperature controllers need high cooling capacity.
In order to meet the above requirements in a simple and efficient way two new ranges of water temperature control units have been introduced:

MV AND DC

Both in the MV range and in the DC range the cooling water is mixed with the process water. The main cooling circuit has to be a closed loop circuit. The two ranges include several models equipped with or without heating elements according to the specific needs. The combination of a chiller with a MV temperature control unit represents an ideal solution when two different water temperatures are required in a mould. Several MV units connected to one main chiller can be installed next to the processing machines in order to obtain different temperature settings.


    Standard equipment :

  • Temperature range: up to 50°C (machines without heaters) and up to 90°C(machines equipped with heating elements)
  • Stainless steel pump
  • Microprocessor temperature controller with double PID
  • Modulating 3 way valve (for MV units) providing high temperature accuracy
  • Larger units are available on request.

    Options :

  • Heaters from 3 to 24 kW
  • High flow and high pressure pumps
  • Flow switch (necessary for units equipped with heating elements)
  • Heating elements controlled by Solid State Relays


Refrigeratori Condensati Ad Acqua Water Cooled Water Chillers

Refrigeratori d’acqua monoblocco a funzionamento automatico di concezione modulare, con condensazione ad acqua.
Modelli con circuito di refrigerazione singolo e un compressore UNI/W, oppure due compressori e due circuiti indipendenti TWIN/W, oppure quattro compressori e quattro circuiti indipendenti:MULTI/W.
L’assenza di ventilatori riduce l’emissione sonora in ambiente e rende possibile, nella maggior parte dei casi, la sovrapposizione di due unità riducendo gli ingombri al suolo.

Modular self-contained water cooled water chillers.
Three series of units: with one refrigeration circuit and one compressor: UNI/W; two compressors and two independent circuits: TWIN/ W; four compressors and four independent refrigeration circuits: MULTI/W.
Reduced overall dimensions; in most of cases the units can be installed stacked one on top of the other.

 

    Opzioni :

  • Versione “T” tropicalizzata
  • Pompa in stand - by
  • Tensioni speciali
  • Versione “MT” per basse temperature

    Options :

  • “T” Version for hot climates
  • Stand-by pump
  • Special voltages
  • “MT” Version for low temperature


Refrigeratori Condensati Ad Acqua Water Cooled Water Chillers

Refrigeratori d’acqua monoblocco a funzionamento automatico di concezione modulare, con condensazione ad acqua.
Modelli con circuito di refrigerazione singolo e un compressore UNI/W, oppure due compressori e due circuiti indipendenti TWIN/W, oppure quattro compressori e quattro circuiti indipendenti:MULTI/W.
L’assenza di ventilatori riduce l’emissione sonora in ambiente e rende possibile, nella maggior parte dei casi, la sovrapposizione di due unità.

Modular self-contained water cooled water chillers.
Three series of units: with one refrigeration circuit and one compressor: UNI/W; two compressors and two independent circuits: TWIN/ W; four compressors and four independent refrigeration circuits: MULTI/W.
Reduced overall dimensions; in most of cases the units can be installed stacked one on top of the other.

 

    Opzioni :

  • Versione “T” tropicalizzata
  • Pompa in stand - by
  • Tensioni speciali
  • Versione “MT” per basse temperature

    Options :

  • “T” Version for hot climates
  • Stand-by pump
  • Special voltages
  • “MT” Version for low temperature


Home      About Us      Partners      News & Events      Enquiry      Services      Contact Us


Address

Plot No. 80, KIDC, Kaman Bhiwandi Road, Village -Poman, Post-Kaman, Vasai(E) - 401 208

Email


smartplastics@gmail.com

Contact Number


+91 98193 27369

SMART MMPL BROCHURE


© 2019 SMART MMPL | Designed by FutureIQ